Every woman dreams of having a young and elastic body all her life. Unfortunately, not everyone manages to preserve youth in a natural way. But don't despair! Now that the medicine does not stop, artificial methods of facial rejuvenation have appeared, which are in demand by many women and even men.
What is material cosmetology?
Hardware cosmetology is a procedure performed using specialized equipment to inject cosmetics under the skin. Currently, with the help of this technology, it is possible to enlarge the breasts, smooth the skin, cleanse the face and much more without any problems or special efforts.
Unfortunately, the face is the part of the body that begins to age the fastest. Older women have visible wrinkles and a loss of skin firmness. To avoid this process, they only used a beautician's hands and certain products that had to be applied to the face almost daily, and this did not bring any particular improvement. Now completely new devices have appeared that are capable of performing various miracles.
To carry out such procedures, only modern and improved equipment is used, which experts equip with a large number of functions, modes and accessories. This is done for the best results.
Readings
All cosmetic procedures should only be performed for two reasons - for the prevention and treatment of signs of aging. Here is a list of some indications for material cosmetology:
- facial wrinkles;
- loss of skin firmness or other signs of aging;
- severe pigmentation of the skin;
- fight against excess weight or cellulite;
- acne;
- tattoo or permanent makeup removal.
This list is quite long, but it should be noted that such procedures are very efficient and comfortable.
The safety of hardware cosmetology in general depends on the qualifications of the specialist, his skills and the maintenance of the equipment.
Contraindications
Unfortunately, not all women can use such procedures, since they have a number of contraindications.
Important to remember!
For pregnant women, physical cosmetology is strictly prohibited, since it can develop various pathologies in the fetus.
What are the contraindications to such procedures? This list contains only the most basic, and a specialist should familiarize you with the others:
- oncological diseases;
- intolerance to a serum or gel intended for injection under the skin;
- tumors; fungi
- and various inflammatory processes;
- poor blood clotting;
- hereditary predisposition to bleeding;
As you can see, contraindications to material cosmetology are very simple. Most importantly, the patient must be in good health. If you have any diseases, first you need to be cured, and only then think about cosmetic procedures.
Types of hardware cosmetology
Anyone can choose the appropriate type of cosmetic procedure, which is right for you and will help you get rid of unwanted problems and areas.
In the age of high technology, there are many different and different procedures that help achieve the desired look:
- Liposuction- removal of excess weight with the help of special devices. The so-called pumping of excess fat from problem areas. Liposuction is divided into two types: ultrasonic and laser. By the very names it is clear: in the first method fat is pumped with the help of sound, and in the second - a laser. It should be remembered that liposuction is contraindicated for obese people.
- Material massage- massage performed using a device. It includes a large number of species that are very different from each other and have different indications. Basically, there are three types of material massage: hydromassage (with water), vibration massage (using artificial vibrations) and pneumomassage (the main distinguishing feature is strong air currents).
- Cryotherapy- a procedure that helps to strengthen the health of the body as a whole, based on the use of a cryopool or cryosauna.
- Lifting- firms the skin, smoothes wrinkles and tones muscles. The effect of such a procedure can be achieved both with the help of cosmetic preparations and plastic surgery.
- Galvanotherapy- material cosmetology, which allows to transform the skin using a weak current discharge with a low voltage.
- Laser cosmetology- a large group of procedures that include the use of specialized lasers to restore elasticity to the skin and prevent sagging of the cheek area.
In addition to all these procedures, hardware cosmetology helps to get rid of new growths on the skin (warts, moles, etc. ), as well as to remove scars after undergoing operations.
Material methods of rejuvenation
Material cosmetology includes a wide variety of rejuvenation techniques. It is simply impossible to choose the most effective of them, because each technique is created for a specific area of the body and skin type.
The most well-known and popular rejuvenation methods among clients of the clinic:
- SMASlifting Alter.Probably the most popular method based on ultrasound. Today it is used in almost all clinics and beauty salons. This procedure is absolutely painless, even a little pleasant, and the results are very pleasant.
- Photorejuvenation.It acts on the epidermis (the deepest layer) of the skin with frequent and intense flashes of light, similar to the process of photography. The result exceeds all expectations: wrinkles are smoothed out, acne disappears, skin pigmentation disappears.
- Thermage.In another way, it is also called radio lifting. It is a process of radio frequency radiation that penetrates the skin and raises its temperature. Thanks to this, the collagen is renewed, which is responsible for the firmness and elasticity of the skin.
- Elos rejuvenation.This procedure uses both light pulses and low current loads, which contribute to rejuvenation. Such cosmetology does not carry anything dangerous, it only brings some discomfort with a slight tingling sensation. The result will also not make you wait long.
- Facial rejuvenation by injection.They differ in certain subgroups among themselves, and the most basic injection is an injection of hyaluronic acid. This rejuvenation method is suitable for those who are afraid of surgery, but want to tighten the skin and make it beautiful.
How to correctly combine facial rejuvenation procedures
To achieve a good visible and lasting result, you must be able to correctly combine completely different techniques of facial rejuvenation. If you approach this matter with ignorance, there is a chance of serious damage to your health.
For example, a Botox injection works well with a contouring procedure. Thanks to such a combination of these techniques, you can get rid of a large number of mimic wrinkles in a short time. You can also experiment with a combination of thermage, and it will not harm the body. Such a procedure will not only help to even out the skin layer, but also contribute to a closer adhesion of the skin to the muscles, which will make the face more expressive.
Manual massage can be effectively combined with thermolifting, because when the collagen is stimulated, the skin tightens and thus acts on the muscles, you can consolidate the result.
Advantages and Disadvantages of Hardware Cosmetology
Hardware cosmetology has many more advantages than disadvantages, so it is thanks to them that it is very popular among customers.
Benefits of cosmetic procedures:
- the main advantage is the correction of the shape of the face and the condition of the skin without surgery, which many people are very afraid of;
- the result appears in a short time and in a small number of procedures;
- the patient experiences minimal discomfort;
- allows you to individually select the necessary technique depending on the age of the client, which is also important;
- versatility and good compatibility with other cosmetic procedures;
- painless.
Despite all the positive aspects of these cosmetic procedures, you should be careful of the drawbacks, which unfortunately also exist. Sometimes you have to solve some manual cleaning problem and then only use the device itself.
It should be noted that each procedure has its own specific advantages and disadvantages, which can be seen on examples:
Thermolifting
Plus- stimulation of collagen production.
Minus- does not affect the muscles.
Manual massage
This is, one might say, the reverse of thermolifting.
Plus- the beautician can perfectly feel the skin, so he knows whether to increase or decrease the force, on which area to work for longer. The muscles of the face are perfectly tightened, the skin becomes smoother and softer.
Less- insufficient production of collagen.
Manual cleaning
Plus- you can remove those skin imperfections that cannot be removed with the help of hardware cleaning.
Minus- after the procedure the skin takes on a red tint, a slightly painful appearance due to microcracks. Manual cleaning is a long and painful process that needs to be done regularly to get any effect.
Hardware cleaning
Plus- security and indolence.
Minus- absolutely ineffective when working with problem skin.
Myostimulation
Plus- direct impact on the muscles with the help of waves.
Less- the beautician does not feel the impact on the client's skin, as with manual cleaning.
Mesotherapy without injection
Plus- rejuvenation, skin stimulation, effective nutrition.
Less- no effect on the muscles.
Comparing all the pros and cons of hardware cosmetology, the conclusion is clear: in order to achieve the best result that will surely please you, you need to follow the procedures with a set, correctly combining them with each other.
Results
For each client, an individual program of necessary procedures is developed according to their skin type, age and lifestyle. The number of sessions also depends on certain conditions. Basically there will be 2-3 doses for 20 minutes per week. After a whole course of apparatus therapy, the result will please you very much: scars and sagging skin will disappear, wrinkles will tighten, the face will acquire a clear and ideal contour.
Thanks to these changes, your well-being will improve, you will look younger and more beautiful. It should be noted that immediately after the procedures it will not be necessary to carry out periods of recovery and rehabilitation. Hardware cosmetology will soon replace plastic surgery.
Hardware cosmetology at home
It can also happen that women do not have enough time to visit salons and clinics often, but they really want to stay beautiful. There is an exit! Now it is possible to carry out hardware cosmetology at home, because this process is quite quick and easy. Today in the cosmetic device market you can find a lot of devices of all kinds, but different in texture, devices for body and face care.
The most important thing is to choose a suitable and high quality product, because only this will give you a guarantee of beauty. We must not forget that you have to use such devices regularly, otherwise you will not see amazing results.
A lot of people are afraid of material cosmetology, and the phrase itself seems horrible and incomprehensible to them, but these procedures are actually completely different. They are virtually painless and absolutely safe, if, of course, you choose the right specialist. Every person needs to improve and monitor their appearance, and material cosmetology is looking to help them!